Lippert Components Solera - Introduction and Safety; Introduction; Safety Information

2
Solera® Awning Ground Support
Aftermarket Manual
www.lippertcomponents.com (574) 537-8900 Rev: 08.16 - Solera® Awning Ground Support
Introduction
The Solera® Ground Support gives added support to the
Solera® Awnings as well as Carefree Awnings and Dometic
Awnings. Additional information about this product can be
obtained from www.lci1.com/support or by downloading the
free MyLCI app. The app is available on iTunes
®
for iPhone
®
and iPad
®
and also on Google Play
™
for Android™ users.
iTunes®, iPhone® and iPad® are registered trademarks of
Apple Inc. Google Play™ and Android™ are trademarks of
Google Inc.
Moving parts can pinch,
crush or cut� Keep clear
and use caution�
If staking Ground
Support Shade to the
ground, be sure to
disable any and all self
re-tracking wind sensing
options on your awning�
Failure to do so could
result in damage
to the awning and unit�
Resources
• Cordless or Electric Drill or Screw Gun
• Appropriate Drive Bits
• Tape Measure
• Non-permanent Method of Marking
• 7/16” Wrench
• 25/64” Drill Bit
• Hammer
Installation
1� Measure the length of the roll tube (Fig. 1).
Fig�1
Fig�2
2� Find the center of the roll tube and mark its location (Fig. 2).
Center of
Roll Tube