Lippert Components SolidStep XF User Manual

Rev: 02.25.21 Page 3 CCD-0004124
Operation
Moving parts can pinch, crush or cut. Keep clear and use caution.
Release Steps
1. From the stowed position (Fig. 1), disengage the transport lock (Fig. 1A) by pulling the transport lock
knob to the right.
2. Firmly grasp and pull out the vertically stored SolidStep XF and rest it firmly on the ground.
3. Adjust leg extensions as needed. See Leg Extension Adjustment section.
Fig. 1
A
B

Lippert Components SolidStep XF Specifications

General

Brand	Lippert Components
Model	SolidStep XF
Category	Automobile Accessories
Language	English