What happens when Sway Command™ detects sway in Lippert Components Automobile Accessories?
When the Sway Command™ system in your Lippert Components Automobile Accessories detects a sway event, it activates the brakes. Once the sway subsides, the light will return to green.
What does 'wake up self-checks in progress' mean on my Lippert Components Automobile Accessories?
When your Lippert Components Automobile Accessories display 'wake up self-checks in progress', the unit is running diagnostics. After a few seconds, it will either set the lights to green if everything is ready or display a flashing code if it finds an issue.
What to do if my Lippert Components Automobile Accessory unit is not functional?
If your Lippert Components Automobile Accessory unit isn't working, try this: disconnect the harness, wait 10 seconds, and then reconnect it. If the light turns on solid red, unplug the unit and contact the service department.
Why is low voltage detected in my Lippert Components Automobile Accessories?
If low voltage is detected in your Lippert Components Automobile Accessories, make sure that both the tow vehicle and tow battery are at 12 volts.
How to troubleshoot a short to ground detected in Lippert Components Automobile Accessories?
If a short to ground is detected in your Lippert Components Automobile Accessories, check that the blue brake wire isn't shorted to ground or the trailer frame.
What to do if Lippert Components Automobile Accessory is not connected to trailer brakes?
If your Lippert Components Automobile Accessory indicates it's not connected to the trailer brakes, verify that the blue brake wire is securely connected to the trailer brakes.
How to fix a short to 12 volt detected in Lippert Components Automobile Accessories?
If a short to 12 volts is detected in your Lippert Components Automobile Accessories, ensure that the break away switch is not activated. Also, verify that the blue brake wire isn't shorted to 12 volts.
General| Product Type | Sway Control System |
|---|---|
| Manufacturer | Lippert Components |
| Power Source | 12V DC |
| Mounting Location | Trailer frame |
| Control Method | Electronic |
| Activation | Automatic |
To Next Page
