Lippert Components Tire Linc 2.0 - Page 6

Rev: 09.27.21 Page 6 CCD-0004071
8. The screen will indicate the RV has connected successfully (Fig. 8). Tap Continue button to proceed.
9. Tap the SETUP COACH button to continue (Fig. 9A).
10. Select a vehicle class and tap CONTINUE (Fig. 10).
11. Select a vehicle layout and tap FINISH (Fig. 11).
12. Finish setup by pressing the arrow to the right of Learn Sensors (Fig. 12A).
NOTE: Scroll down the screen to view the Learn Sensors button.
Fig. 8
Fig. 9
A
Fig. 10
Fig. 11
Fig. 12
A
B