TME-104P-CSR-LX800-R1V5.doc Rev 1.5 5 (44)
1.4 Mechanical
Dimensions (L x W) 95.9 mm x 90.2 mm (including I/O extension)
Height max. 14 mm on top side above PCB
max. 12 mm on bottom side above PCB
Weight 100 g
Mounting 4 mounting holes
Note: It is strongly recommend using plastic spacers instead of metal spacers to
mount the board. With metal spacers, there is a possible danger to create
a short circuit with the components located around the mounting holes.
This can damage the board!
TOP
Pin1 Pin2
To Next Page
Loading...