EasyManua.ls Logo

Lippert Cool SpaceRunner-LX800 User Manual

Default Icon
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TME-104P-CSR-LX800-R1V5.doc
Revision 1.5 / March 09
©LiPPERT Embedded Computers GmbH
Hans-Thoma-Str. 11
D-68163 Mannheim
http://www.lippertembedded.com/
Cool SpaceRunner-LX800
PC/104-Plus CPU Board
Technical Manual
Question and Answer IconNeed help?

Do you have a question about the Lippert Cool SpaceRunner-LX800 and is the answer not in the manual?

Lippert Cool SpaceRunner-LX800 Specifications

General IconGeneral
BrandLippert
ModelCool SpaceRunner-LX800
CategoryComputer Hardware
LanguageEnglish

Summary

1.3 Specifications

Electrical Specifications

Lists the electrical parameters of the Cool SpaceRunner-LX800, including supply voltage, rise time, and current.

1.4 Mechanical

2 Getting Started

2.2 Jumper Locations

2.3 LED Indicators

2.4 Hardware Setup

3 Module Description

3.1 Processor

Details the AMD Geode LX 800 processor, its architecture, power efficiency, and functional blocks.

3.2 Companion Device

3.3 Graphics and Display Features

SVGA Configuration

Detailed table of SVGA display modes, resolutions, refresh rates, and dot clocks.

Display Interfaces and Connectors

Details VGA, LVDS, and Backlight connectors, plus display voltage selection jumpers.

3.4 EIDE Solid State Drive

3.5 Ethernet Controller

3.6 On-Board Power Supply

3.7 EIDE Port

3.8 PS/2 Interface

3.9 USB 2.0 Ports

3.10 Serial Ports

RS485 Termination Jumpers

3.11 Parallel Port LPT1

3.12 Watchdog Timer

3.13 LEMT Functions

3.17 PC/104-Plus Bus Interface

3.18 PC/104 Bus Interface

4 Using the Module

4.1 BIOS Configuration

Covers the Insyde Technology XpressROM BIOS, its features, and how to configure it.

Motherboard Device Configuration

Details the BIOS menu for configuring drives, LPC, DDMA, display, GPIO, and PCI settings.

Drive Configuration

Explains how to configure connected EIDE devices, including DMA/UDMA settings and SSD master/slave selection.

Serial and Parallel Port Configuration

Describes the BIOS menu for configuring serial ports (COM1, COM2) and the parallel port (LPT1).

Troubleshooting BIOS Settings

4.2 Drivers

4.3 LIVE LED Programming

4.4 Watchdog Programming

4.5 Reading Temperatures

5.2 I/O Address Map

5.3 Interrupts

5.4 DMA Channels

5.5 PC/104 Bus Address Space