TME-104P-CSR-LX800-R1V5.doc Rev 1.5 32 (44)
The Serial and Parallel Device Configurations menu allows configuring COM1, COM2 and LPT1.
COM-Ports can be switched between RS232 and RS485. It is possible to change the resource and
interrupts of all ports.
Hard Drive Setting Options
Serial Port 1/2 Disabled, 0x3f8 IRQ 4, 0x2f8 IRQ 3,
0x3e8 IRQ4, 0x2e8 IRQ3
Serial Mode RS232, RS485
Parallel Port Disabled, 0x378, 0x278, 0x3BC
Parallel Mode Compatible, PS/2 Bi-directional,
EPP 1.7, EPP 1.9, ECP
Parallel IRQ Disabled, IRQ5, IRQ7, IRQ9, IRQ10,
IRQ11
Parallel DMA Channel 1, Channel 3
To Next Page
Loading...