Lippert Cosmo 2 Euro - Post-Installation Checks; Verifying Height Adjustment Lock

Rev: 08.31.23 Page 11 CCD-0007174
Post-installation Check
1. Pull the height adjustment handle (Fig. 16A) and lift to extend the table (Fig. 17).
2. Move the height adjustment handle back into its locked position.
3. Press downward on the table to make sure the collapsible leg is locked in-place and the table does
NOT travel downward.
A
Fig. 15
Fig. 16 Fig. 17
24. Release the leg covering (Fig. 15A) so it extends down to the base.
A
Floor