Need help?Do you have a question about the Lippert Tri-Fold Sofa and is the answer not in the manual?
General| Category | Indoor Furnishing |
|---|---|
| Type | Sofa |
| Manufacturer | Lippert |
| Color | Varies by model |
| Dimensions | Varies by model |
| Weight Capacity | Varies by model |
| Folding Mechanism | Tri-Fold |
| Material | Fabric |
| Usage | Indoor |
Provides links and app information for additional resources on Lippert furniture products, including support websites and the LippertNOW app.
Emphasizes reading instructions before use and following all safety labels to prevent severe injury or product damage.
Explains WARNING and CAUTION symbols, detailing potential risks and recommending safety equipment like eye protection.
Step-by-step instructions for converting the Tri-Fold Sofa from sofa mode to bed mode.
Guidance on using the back cushions as headrests or pillows after sofa transformation.
Lists necessary tools, including drills, sockets, and various screw drivers, for assembly and repair tasks.
Instructions for replacing the full back cushion assembly using hook and loop fabric strips.
Steps to replace the foam insert within a back cushion, involving cover unzipping and re-zipping.
Procedure for replacing the outer cover of a back cushion, including unzipping and re-zipping.
Detailed steps for removing and installing the entire stationary back assembly using mounting hardware.
Guide to replacing the foam inside the stationary back, requiring cover manipulation.
Instructions for replacing the internal frame of the stationary back, including foam and cover.
Procedure for replacing the outer cover of the stationary back, involving unzipping and fitting.
Steps to detach the couch seat from the middle seat using cotter pins and clevis pins.
Instructions for replacing the foam within the couch seat, involving cover removal and re-zipping.
Guide to replacing the interior frame of the couch seat, including foam and cover.
Procedure for replacing the couch seat's outer cover, involving unzipping and re-fitting.
Instructions for removing and installing couch seat legs by managing bolts and nuts.
Steps to remove the middle seat assembly by detaching screws and cotter pins from the V2 frame.
Procedure for replacing the foam in the middle seat, involving cover unzipping and re-zipping.
Guide to replacing the internal frame of the middle seat, including foam and cover.
Instructions for replacing the middle seat's outer cover, involving unzipping and re-fitting.
Steps to install the V2 frame, ensuring correct orientation and securing with screws.
Procedure for removing and installing the front kick rail, ensuring it is flush with the kick board.
Steps to remove and install the rear kick rail by securing it with screws on each side.
Guide to installing a new arm insert by tapping it onto the arm with a mallet.
Procedure for removing and installing the foot assembly by securing it with screws.
Use warm water only to clean the material; avoid using any chemicals.
Recommended monthly tightening of leg bolts and nuts to prevent damage to cushion covers.
Overview of preparing the knock down sofa, including required resources and unpacking steps.
Instructions for laying out sofa pieces like arm rests, kick rails, and setting aside seating cushions and u-bars.
Steps to connect the rear and front kick rails to the arm rests using slot brackets.
Notes on the U-bar and seat cushion assembly, including screw removal for proper connection.
Instructions for folding the u-bar, locking it into place, and securing arm rests and back brackets.
Steps to fold the seat onto the sofa and attach the back cushions using Velcro strips for complete assembly.
To Next Page
