Lippert Tri-Fold Sofa - Middle Seat Foam Replacement; Middle Seat Frame Replacement; Middle Seat Cover Replacement; V2 Frame Component Replacement

Rev: 05.22.23 Page 9 CCD-0001740
Middle Seat Interior Foam
1. Unzip cover from the middle seat.
2. Remove and discard foam.
3. Place new foam on the interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Middle Seat Interior Frame
1. Unzip cover from the middle seat.
2. Remove and discard the old interior frame.
3. Place foam on the new interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Middle Seat Cover
1. Unzip cover from the middle seat.
2. Remove and discard the old cover.
3. Slip new cover over the interior frame and foam.
4. Zip cover completely.
V2 Frame Replacement Instructions
NOTE: To replace the V2 frame the middle seat, couch seat and stationary back assembly needs to be
removed first for easier access.
1. Remove the V2 frame by removing the three screws on each side.
2. Install the V2 frame by making sure the U shape faces the back (Fig. 12).
3. Install the three screws on each side (Fig. 13).
Fig. 12
Fig. 13