Lippert Tri-Fold Sofa - Kick Rail Component Replacement; Front Kick Rail Installation; Rear Kick Rail Installation

Rev: 05.22.23 Page 10 CCD-0001740
Fig. 14
Screws
Fig. 15
Front Kick Rail Replacement Instructions
NOTE: To replace the front kick rail, the V2 frame, middle seat, couch seat and stationary back assembly
need to be removed first for easier access.
1. Remove the old front kick rail by removing the three screws on each side (Fig. 14).
2. Install the new front kick rail by making sure rails are flush with bottom of kick board. Insert the three
screws on each side.
Rear Kick Rail Replacement Instructions
NOTE: To replace the rear kick rail, the V2 frame, middle seat, couch seat and stationary back assembly
needs to be removed first for easier access.
1. Remove the old kick rail by cutting a small slit in the Typar® material to show the two screws on each
side. Remove the two screws on each side (Fig. 15) of the couch.
2. Install the new rear kick rail by inserting the two screws on each side.