Rev: 05.22.23 Page 12 CCD-0001740
Knock Down Sofa Preparation
Resources Required
NOTE: Resources required may vary due to actual operation performed. Listed below is what may be
required.
• Cordless or electric screw gun or drill
• Appropriate screw drivers
• Appropriate drive bits
NOTE: Knock Down sofa comes in two boxes. Need spacious place to lay items out flat.
1. Remove the Knock Down sofa pieces from the packaging.
2. Place the arm rest pieces, front kick rail, and rear kick rail flat on the floor (Fig. 18).
3. Set the seating cushion, u-bar (comes assembled) and the back of the sofa aside.
NOTE: The hardware is two different colors making assembly quick and easy. The rear kick rail hardware
will match up with the attached hardware on the arm rest and the front kick rail will match up with
the front arm rest.
Fig. 18
Front Kick Rail
Arm Rest
Arm Rest
Rear Kick Rail
Brackets
Brackets
To Next Page
Loading...
