Lippert Tri-Fold Sofa - Folding and Securing Sofa Components

Rev: 05.22.23 Page 14 CCD-0001740
3. Unfold the u-bar down adjacent to the back rear kick rail (Fig. 23). Insert the black tabs on the u-bar
into the L-brackets on the arm rest sides and push down and to the side to lock it in place. (Fig. 24)
Repeat process on opposite side.
U-bar
Fig. 23
Fig. 24
4. Secure arm rest and u-bar with the two side screws that were previously removed (Fig. 25).
5. Align the back sofa brackets with the holes on the back u-bar (Fig. 26) and secure with the remaining
screws.
Fig. 25
Fig. 26
Black tabs