Rev: 08.31.23 Page 4 CCD-0007174
Installation
1. Find a location for the COSMO 2 Euro Collapsible Table Leg (Fig. 2), making sure there is enough
clearance for the pedestal with a table top installed to fully extend.
2. Pull the height adjustment handle (Fig. 2A) and lift the leg's slide support mounting plate (Fig. 3A) to
fully extend the leg.
3. Move the height adjustment handle back into its locked position.
4. The slide support has four mounting holes located across its two pedestal mounting flanges (Fig.4A).
Place the slide support on top of the pedestal's top mounting plate such that the support's four
mounting holes align with the four mounting slots located on the pedestal's top plate.
5. Orient the slide support with the table slide handle on the same side as the height adjustment
handle(Fig. 4).
A
A
Fig. 2 Fig. 3
To Next Page
Loading...
