Lippert Cosmo 2 Euro - Securing the Slide Support

Rev: 08.31.23 Page 5 CCD-0007174
6. Install a flat washer (Fig. 5A) onto a hex socket head button screw (Fig. 5B). Repeat to assemble
fourscrews.
7. Insert each assembled screw into a mounting hole on the slide support (Fig. 5C).
8. Secure the slide support to the pedestal's top plate by installing a hex nylon lock nut (Fig. 5D) onto
each screw (four places) and securely tighten with a wrench.
A
C
B
D
A
A
Height Adjustment Handle
Table Slide Handle
Slide Support
Fig. 4
Fig. 5