Lippert Cosmo 2 Euro - Adjusting Cable Tension for Table Slide

Rev: 08.31.23 Page 6 CCD-0007174
9. Pull the table slide handle outward (Fig. 6A) to release tension on the cable (Fig. 6B).
10. Use a wrench to turn the cable tensioner (Fig. 6C) counterclockwise to loosen the cable.
11. Route the cable so that it goes between the slide table bracket (Fig. 7A) and the threaded stud (Fig. 7B)
for the stopper nut.
NOTE: Pedestal not shown for clarity.
A
C
B
A
B
Fig. 6
Fig. 7