EasyManua.ls Logo

Lippert SlimRack - Wiring Diagram for Controller 1510000276; 366703 (WGO)

Lippert SlimRack
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev: 01.07.22 Page 22 CCD-0001459
Pin Color What It Controls
1 Green Channel 1 Sensor
2 Yellow Channel 2 Sensor
3 Black Ground Sensor
4 N/A N/A
5 Red Power Sensor
6 Red Motor Lead 1
7 Black Motor Lead 2
8 N/A N/A
Pin Color What It Controls
1 Black Ground
2 Red Power
Pin Color What It Controls
1 Gray Fault Code LED
2 Red Switch Power
3 Yellow Switch Out
4 Blue Switch In
NOTE: If the slide-out operation rocker switch is not supplied by Lippert Components, the gray wire on the
4-wire switch harness is not used.
Rocker Switch Harness
Adapter Wire Harness (Service only)
Power Harness
Controller-to-Motor Harness
See
NOTE
Wiring Diagram for Controller 1510000276 / 366703 (WGO - Discontinued)

Related product manuals