Rev: 01.07.22 Page 3 CCD-0001459
1510000276 / 366703
(Winnebago)
Discontinued -
replaced by 697096 or 700156
and harness 387587
Fig. 3
Product Information
The Lippert SlimRack Slide-Out system is a rack-and-pinion design operated by a 12V DC gear motor. Slide-
out systems are engineered to provide years of trouble-free service. Changes to weight, stroke, weight
distribution, gear rack position, controller, power supply seals, slide toppers, ramps, rollers, etc., all have
an effect on the performance of the system. In order to secure warranty coverage, each new application
or changes to existing applications MUST be audited and approved by Lippert Components with a signed
document. Audits can be arranged by contacting Lippert Components.
This manual provides information for slide-out systems that use one of three different controllers: Power Gear
part number 1510000199 / Lippert part number 366697 ,700155, 700157 (Fig. 1), Power Gear part number
1510000236 / Lippert part number 366701 697096, 700156 (Fig. 2) or Power Gear part number 1510000276 /
Lippert part number 366703 (Fig. 3). Controller Power Gear part number 1510000199 / Lippert part number
366697 connects to a touchpad. Controller part numbers (Power Gear / LCI) 1510000236 / 366701 and
1510000276 / 366703 connect to a rocker switch.
NOTE: Previously, some Winnebago models used controller Power Gear part number 1510000276
/ Lippert part number 366703 (Fig. 3) which required a wire harness with an 8-pin connector
for connecting the controller to Motor 2 (Fig. 3A). For all new units, Power Gear part number
1510000276 / Lippert part number 366703 has been replaced by number 697096 or 700156. For
servicing older Winnebago units, controller Power Gear part number 1510000276 / Lippert part
number 366703 has been replaced with controller part number 697096 or 700156 with an added
adapter wire harness 387587 (see section Wiring Diagram for controller 1510000276 / 366703 (WGO
- Discontinued.)
A
1510000199 / 366697
Fig. 1
1510000236 / 366701
Fig. 2
700155
700156700157
697096
NOTE: All the controllers that are being replaced by the new controllers. Refer to New Slim Rack Controller
QR-124 document.
Replacements
Replacements
To Next Page
Loading...