Rev: 01.07.22 Page 4 CCD-0001459
Motor-Block Assembly
Early February 2018 Production
Fig. 6
Motor-Block Assembly
Production Prior to February 2018
Fig. 4
There are two types of brackets used for fastening the motor and block assembly. Effective early February,
2018, the bracket used for the spring and hook attachment (Figs. 4 and 5) between the motor and the block
was replaced with a new bracket and retention screw (Figs. 6 and 7).
Old Bracket 389061
Fig. 5
New Bracket 422671
Fig. 7
To Next Page
Loading...
