ENG-9
3.3 Setting the Date and Time Mode
This feature allows you to set the Date and Time to the photo or video file.
1. Press and hold the POWER/MODE button to turn on the camera.
2. Press and hold SHUTTER/SELECT button down then press POWER/MODE
button 3 times continuously and then release the SHUTTER/SELECT button.
The LCD screen will access the Time Setting mode.You will be able to change
Year(YYYY),Month(MM),Day(DD),Hour(hh),and Minute(mm).The first window will
be YYYY for Year. Press the SHUTTER/SELECT button and the numbers will
appear(ie.2009).The first number “2” in the year will start blinking.
3. Press the POWER/MODE button to change the blinking character from 0-9.
Press the SHUTTER/SELECT button to select the number and move onto the
number “0”. The setting process is from the left to right and will go through the
different settings from Year, Month, Day, Hour,and minute. Once the number is
confirmed by pressing the SHUTTER/SELECT button,the next digit will start
blinking.Once the you see the letters again such as MM for Month, press the
SHUTTER/SELECT button to move to the numbers representing the month.
Continue the process until you return to YYYY.
4. To get out of the Date and Time Setting Mode, press and hold the
SHUTTER/SELECT button for 2 seconds. The CAMERA MASK will return to the
still image mode(RED LED).
5. In case the battery needs to be replaced or the battery runs out ,the date setting
data will be maintained for 24 hours.
To Next Page
Loading...