Lissmac MULTICUT 800 - Page 12

12
2.6 Rotation speeds
MULTICUT 800 G
210693
Ø 500 – 800 mm Ø 700 – 1200 mm
rpm rpm rpm
2650 1550 970
2480 1450 910
2310 1350 850
2140 1250 780
1970 1150 720
MULTICUT 800 GH
210694
Ø 300 – 550 mm Ø 500 – 800 mm
rpm rpm rpm
2660 2500 1550
2550 2400 1450
2450 2300 1350
2340 2200 1250
2230 2100 1150
2.7 Water pressure
The water pressure in the lines to the floor cutter must not
exceed 5 bar.
Otherwise use a pressure reducer and reduce the water
pressure to max. 5 bar.