Lite-Check INSPECTOR 920 - Viewing Stored Faults; Clearing Active and Stored Faults; Mileage; ECU Voltage

LITE-CHECK INSPECTOR 920
Page: 25 of 36
When the fault is displayed, press the SELECT key to view the manufactures repair
notes.
Viewing Stored Faults
View a stored fault by moving the cursor to the “VIEW
STORED FAULT” option and pressing SELECT. The
digital display will show previously discovered faults for
this trailer.
Pressing the DOWN button will display the first stored
fault. In this case, an “Open Circuit” is indicated. Press
the DOWN button again to display the next stored fault.
Press the UP button to return to the previous fault.
Clearing Active and Stored Faults
Move the cursor –> UP or DOWN to select “ACTIVE
FAULTS” or “STORED FAULTS,” press the SELECT
button to clear the faults from the ECU’s memory.
Mileage
This option displays the odometer mileage and trip
mileage for the trailer if the ECU manufacturer supports
it. Press the SELECT button to reset the trip mileage.
ECU Voltage
This option displays the power supply and ECU voltage.
VIEW STORED FAULTS
NUMBER FOUND (6)
Press up down keys to
see faults.
STORED FAULT No. 1
FAULT CODE:69 CT:2
DUMP SOL YELLOW
OPEN CIRCUIT
CLEAR:
‐>ACTIVE FAULTS
STORED FAULTS
MILEAGE
TRIP 0
ODOMETER 96.53
‐>RESET TRIP
VOLTAGE
SUPPLY: 13.85 VOLTS
ECU: 13.55 VOLTS