LITE-CHECK INSPECTOR 920
Page 34 of 36
Warranty, Contact and Service Information
LITE-CHECK products have a one-year limited warranty on parts and labor against
manufacturing defects. All warranty service to be performed at LITE-CHECK, Spokane,
Washington. The Customer is responsible for shipping costs. The warranty does not
cover abuse, neglect, or damage caused by air, electrical, or other outside sources as
specified in the owner’s manual. Some parts may be subject to OEM warranties. Any
modifications made to the equipment without prior written approval, voids this warranty.
Any software upgrades released within one year from the date of shipment will be
provided at no additional cost. Extended, enhanced and/or expedited warranties are
available.
Testers and power supplies have a serial number attached to the device for tracking
purposes.
Questions concerning operation and service may be addressed to LITE-CHECK by
calling 1-800-343-8579 during normal business hours (Pacific Time Zone).
Shipping LITE-CHECK Products
Please follow these instructions for shipping LITE-CHECK testers and products to
minimize damage.
1. Remove all air connections from the tester
2. Include the remote control and antenna with the tester
3. Select a sturdy box that exceeds the tester’s size by at least 2 inches in all three
dimensions.
4. Pack tester in an upright position with the shipping label on top of the box
5. Place dunnage on bottom and all surfaces to prevent movement inside box
6. Enclose return shipping instructions
7. Include a brief explanation of equipment problems and history
Ship to the following address:
LITE-CHECK LLC
3102 E Trent Ave, Suite 215
Spokane, WA 99202
To Next Page
Loading...
