Lite-Puter DX-1210 - DMX Address Setting; How to Connect over 2 Sets of DX-1220;DX-1220 Af Series

DX-1210/DX-1210T/DX-1220/DX-1220AF/DX-1230/DX-630/DX-640 [EUM-O] 14
4-2 DMX Address Setting
Press "MODE" key to choice DMX mode, and then press the assist key to confirm the start address of
DMX channels.
Assist Keys:
Press【►】: Increase channel number
e.g.: Led display from d 0 0 1 to d 0 0 2.
Press【◄】: Decrease channel number
e.g.: Led display from d 0 0 2 to d 0 0 1.
Press【▲】:
DX-1210/1210T/1220/1220AF/1230 increases 12 channel number。
e.g. ： d 0 0 1 becomes d 0 1 3
DX-630/640 increases 6 channel number。
e.g. ： d 0 0 1 becomes d 0 07
Press【▼】: Restore back to d 0 0 1.
Press【SEL】: Select/confirm
4-3 How to Connect Over 2 Sets of DX-1220/DX-1220AF Series
Important:
When multiple DMX-512 dimmer connected in daisy chain, the terminate switch on last dimmer
should turn on. The terminate switches on rest dimmer should turn off.
www.m-s-v.eu