Lite-Puter DX-1210

To Next Page

To Previous Page

DX-1210/DX-1210T/DX-1220/DX-1220AF/DX-1230/DX-630/DX-640 [EUM-O] 18

4-6-2 Dimming/ Switch Modes

Make sure dimming/switching mode is correctly set before turning on the power.

Never set dim on the channel with a non-dimmable loads..

All channels are in dimming mode.



All channels are in switch mode.



Some channels are dimming; some channels are switch.



Press【►】: Increase channel number

Press【◄】: Decrease channel number

Press【▲】: Switch (non-dim);

Press【▼】: Dimming

Press【SEL】: Select/confirm

Lite-Puter DX-1210 - Page 18