18
Recording
Recording from External Devices
Connect external equipment using standard CVBS (RCA) analog
audio/video cable or IEEE-1394 cable to record contents or
camcorder footage onto a disc in the digital video format or onto a
VHS tape in the analog video format.
Recording from External Devices: VCR or
Camcorder
Connect a video cassette recorder or camcorder to the unit’s input
terminals.
Via Front-Panel Jacks:
To start recording:
1. Press [SETUP] and then select “Record” to set the
desired recording mode.
DVD Quality Tape Quality
2. Make sure that a recordable disc or a VHS tape
is inserted or loaded for recording.
When you insert a new recordable disc for recording, the recorder
will automatically start the disc preparation process.
3. Press [SOURCE] to select a signal input source
depending how the VCR or camcorder is connected
to the unit.
AV1-Front: For a device connected to the front Audio/Video Input.
AV2-Rear: For a device connected to the rear Audio/Video Input.
S-Video: For a device connected to the rear S-Video Input.
DV: For a device (such as a digital camcorder) connected to the
front DV Input with a DV cable.
4. Press [DVD] to control the DVD deck or [VHS] to
control the VCR deck first.
5. Cue the source VCR or the camcorder and start
playback at the beginning of the scene you wish to
record.
6. Press [RECORD] to start recording.
7. Press [
STOP] to stop recording.
To pause recording:
Press [ PAUSE] to pause recording.
If you want to resume recording, press [
PAUSE] again or
[RECORD].
Press [ GUIDER]
1. Press [ GUIDER] to display the Easy Guider menu.
2. Press [] [] to select “Playback” and then press
[ENTER].
3. Press [] [] to select “Play Tape” and press [ENTER].
Via Rear-Panel Jacks :
To Next Page
Loading...