Litepanels Gemini 2x1 Soft User Manual

9
litepanels.com
Squares (Sharp Pulses)
Alternate the light output level between a high and low value either on a regular interval or when
triggered manually - this creates very abrupt changes in light level output
LEFT
CENTER
RIGHT
TURN
HUE
Color wheel in degrees
Red = 0
Green = 120
Blue = 240
SAT
Purity of the HUE
0 = White (5600K)
100 = Pure Color
DIM
0 = No Output
100 = Full Output
TURN
ON TIME
Adjust the pulse duration in
milliseconds
Eg:
30 = 30 ms pulse
5000 = 5 sec pulse
OFF TIME
Adjust the amount of time between
pulses
Eg:
30 = 30 ms OFF TIME
5000 = 5 sec OFF TIME
BIAS
Adjust the light output
level while between
pulses
PRESS
Change Row
MODE
Select LOOP MODE
or MANUAL MODE
MANUAL MODE = Activate the
pulses with BUMP Only
LOOP MODE = Pulses repeat as
determined by OFF TIME setting
BUMP
Press to activate the
pulses manually at any
time
Notes:

Litepanels Gemini 2x1 Soft Specifications

General

Brand	Litepanels
Model	Gemini 2x1 Soft
Category	Lighting Equipment
Language	English