Litepanels Gemini 2x1 Soft User Manual

5
litepanels.com
Hue Burst
Bursts of multiple 36 millisecond pulses. Can be used to simulate muzzle flashes
LEFT
CENTER
RIGHT
TURN
HUE
Color wheel in degrees
Red = 0
Green = 120
Blue = 240
SAT
Purity of the HUE
0 = White (5600K)
100 = Pure Color
DIM
0 = No Output
100 = Full Output
TURN
GAP
Adjust the amount of time in
between pulses in a burst
Adjustment Range: 36 to 400
milliseconds
OFF TIME
Sets the repetition rate of the
bursts while in LOOP MODE
QTY
1 = Single pulse/burst
16 = 16 pulses/burst
PRESS
Change Row
MODE
Select LOOP MODE or MANUAL
MODE
MANUAL MODE = TRIGGER the
bursts manually
LOOP MODE = Bursts repeat as
determined by OFF TIME setting
TRIG
Press to trigger the
burst manually at any
time
Notes:
GAP formula for muzzle flashes: GAP= ((1/(RPMs/60)) - 0.036)x1000
Typical GAP settings for muzzle flashes:
- 833RPM = 36 GAP
- 700RPM = 50 GAP
- 600RPM = 64 GAP

Litepanels Gemini 2x1 Soft Specifications

General

Brand	Litepanels
Model	Gemini 2x1 Soft
Category	Lighting Equipment
Language	English