Litepanels Gemini 2x1 Soft User Manual

8
litepanels.com
Pulsing (Ramp Up/Ramp Down)
Light output level increases and decreases over a set period of time, creating a pulsating effect
LEFT
CENTER
RIGHT
TURN
HUE
Color wheel in degrees
Red = 0
Green = 120
Blue = 240
SAT
Purity of the HUE
0 = White (5600K)
100 = Pure Color
DIM
0 = No Output
100 = Full Output
TURN
RAMP T
Adjust the amount of time for
the pulse to ramp up
The same value is used for ramp
down
Eg:
40 = Fast Ramp
2000 = Slow Ramp
ON TIME
Adjust the amount of time between
the end of ramp up and beginning of
ramp down
Eg:
25 = 25 ms before ramp down
5000 = 5 sec before ramp down
OFF T
Adjust the amount of
time between pulses
while in LOOP MODE
PRESS
Change Row
MODE
Select LOOP MODE or MANUAL
MODE.
MANUAL MODE= Trigger the
Pulses manually only.
LOOP MODE= Pulses repeat as
determined by OFF T setting.
TRIG
Press to trigger the
pulses manually at any
time
Notes:

Litepanels Gemini 2x1 Soft Specifications

General

Brand	Litepanels
Model	Gemini 2x1 Soft
Category	Lighting Equipment
Language	English