page 2
1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
2. Parts Inventory.
a. canopy. 1 piece
b. hanging bracket (pre-attached to canopy).
1 piece
c. 4in. downrod and hanging ball (with pin and
clip). 1 piece
d. motor housing. 1 piece
e. blade arm. 5 pieces
f. switch housing cap. 1 piece
g. blade. 5 pieces
h. light kit fitter. 1 piece
i. glass shade. 4 pieces
j. hardware packs
required bulbs:
4 x 40 watt candelabra base bulbs
(included)
a
b
c
d
e
g
h
i
j
f
To Next Page
Loading...
