Startco Engineering Ltd. Page 14
SE-325 Neutral-Grounding-Resistor Monitor Rev. 0
Pub. SE-325-M, May 6, 2008.
5. ORDERING INFORMATION
SE-325
120-Vac Supply
E 240-Vac Supply
D 120-Vac/dc Supply
(2)
S Extended Resistor Trip Time
H Harmonic Filtering
N Non-latching Operation
T Extended G-F Trip Time
Option List
(1)
(1)
2
List options required in order shown above.
Standard, leave blank.
SE-325P ....Approved by
The Commonwealth of Pennsylvania
for 4,800- NGR.
Requires 20-k sensing resistor.
W
W
()
Sensing Resistors:
ER-600VC.............................For system voltages up to
1 kVac
ER-5KV ................................For system voltages up to
5 kVac
ER-15KV ..............................For system voltages up to
15 kVac
ER-25KV ..............................For system voltages up to
25 kVac
Ground-Fault CT:
CT200....................................56 mm (2.2") Window
Remote Indication and Reset:
RK-302..................................Includes two LED pilot
lights, a reset push button,
and legend plates
RK-325..................................Indication-and-Reset
Assembly
RK-325I ................................Indication Assembly
RK-13....................................Relay Interface Module
6. W
ARRANTY
The SE-325 Neutral-Grounding-Resistor Monitor is
warranted to be free from defects in material and
workmanship for a period of five years from the date of
purchase.
Startco Engineering Ltd. will (at Startco’s option)
repair, replace, or refund the original purchase price of an
SE-325 that is determined by Startco to be defective if it
is returned to the Startco factory, freight prepaid, within
the warranty period. This warranty does not apply to
repairs required as a result of misuse, negligence, an
accident, improper installation, tampering, or insufficient
care. Startco Engineering Ltd. does not warrant products
repaired or modified by non-Startco Engineering Ltd.
personnel.
Startco Engineering Ltd. is not liable for contingent or
consequential damages; for expenses sustained as a result
of incorrect application, incorrect adjustment, or a
malfunction; or for expenses resulting from the use of, or
inability to use, the product.
To Next Page
Loading...
Need help?
General