LitterMaid LM2680 - Weekly Cleaning Routine; Thorough Cleaning Instructions

WEEKLY CLEANING
Paw Cleaning Ramp
Note ： The paw cleaning ramp is designed to remove
litter from your cat's paws as it exits the litter box.
1. Grasp the ramp on either side near the attachment
points and lift up gently.
2. Grasp the rubber mat on one side and lift up to
remove
(H).
3. Remove the rubber mat to remove loose litter particles.
4. Tip over and empty the mat holder to ensure no litter remains trapped
under the mat.
5. Replace the mat by sliding the four corners of the mat under the four
holder points on the comers of the ramp.
Note ： The mat and ramp are both cut in on the back side near the
attachment points. Always make sure you are putting the mat into
position
correctly by matching the shape of the two pieces.
Motion Sensors & Top Housing
Notes The motion sensors on the inside walls of the litter
box are what activate the CLEANING cycle. Keep sensors
free of dust to ensure proper operation.
1. Use a soft, dry cloth or towel to gently wipe the
sensors
and remove any dust ⑴.
2. Use the cloth to wipe the exterior surfaces of
the top housing to maintain its appearance.
THOROUGH CLEANING
Note ： Clean thoroughly once a month to ensure optimal operation.
Important ： We recommend wearing rubber or Latex gloves when handling the
soiled rake or litter tray.
12