Need help?Do you have a question about the LNS Super Hydrobar HS Series and is the answer not in the manual?
General| Coolant Capacity | Varies by model |
|---|---|
| Pump Flow Rate | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Type | Hydrostatic Bar Feeder |
| Series | Super Hydrobar HS Series |
| Application | For feeding bar stock in CNC Lathes |
| Control System | PLC Controlled with interface to CNC Lathe |
Provides an overview of basic information and terminology used in the manual.
Explains the meaning of various symbols and common terms used throughout the document.
Outlines copyright, liability disclaimers, and trademark information for LNS products.
Details the technical specifications, dimensions, and models of the SUPER HYDROBAR HS.
Presents layout diagrams and essential dimensions for installing the bar feed system.
Offers a comprehensive labeled diagram of the bar feed system's components.
Guides the user through unpacking, mounting, and initial setup procedures.
Instructions for safe handling, unpacking, and preparing the device for installation.
Step-by-step instructions for physically installing and aligning the bar feeder on the lathe.
Focuses on risk assessment and safety protocols for integrating the bar feeder.
Details on connecting hydraulic lines and filling the system with oil.
Covers electrical wiring, safety switches, and interface setup for operation.
Information on routine upkeep, cleaning, and care for optimal performance and longevity.
Specific maintenance tasks for the hydraulic unit, including filter cleaning.
Recommended methods and precautions for cleaning the bar feed system.
Guidelines regarding the use of authorized spare parts and modifications.
Comprehensive safety guidelines critical for preventing accidents and ensuring safe operation.
Explanation of the safety features, covers, switches, and emergency stop functionality.
Procedures for preparing the machine for initial operation and setup.
Step-by-step guide to adjust the bar feeder for different bar sizes.
Instructions on how to prepare, adjust, or replace the pusher components.
Process for loading new bars and initiating the bar feed cycle.
Explains the different operating modes and sequences for the bar feeder.
Details on monitoring and managing the end-of-bar signal and related functions.
A template for ordering spare parts, accessories, or new equipment.
Contact details and locations for LNS support and agencies worldwide.
Provides an example of programming code for integrating with CNC lathes.
To Next Page