Loadrite LP930 - Configuration

2-7
LOADRITE LP930 | LP930-BT Printer User Manual
2.4. CONFIGURATION
Ensure that the following settings are applied to the applicable LOADRITE Weighing System Indicator or Integrator that the
printer is connected to:
C-Series Integrator
 User Menu > Setup > Configure > Comms
Menu Option
Value
Prt Port
LP930
 User Menu > Setup > Configure > Comms > Prt Menu
Menu Option
Value
Baud
9600
L-Series Indicator
 Install Menu > Setup > Configure > Print
Menu Option
Value
Printer
LP950
Baud
9600
Payload Management for Earthworks (LM520)
All settings are automatically configured via Bluetooth
®
and do not require any changes.
X-Series Indicator
 Install Menu > Setup > Configure > Print
Menu Option
Value
Printer
LP950
Baud
9600