Loadrite LP930 - Specifications

4-9
LOADRITE LP930 | LP930-BT Printer User Manual
4. SPECIFICATIONS
Environmental
Operating temperature 0°C to +50°C.
Weight
(excluding mounting bracket)
Approx 340g (inc roll of paper).
Print Method
Fixed head thermal mechanism.
Paper
 Width: 57.5mm
 Maximum Roll Diameter: 55mm (approx length: 33 meters)
 Accepts paper rolls with or without a core.
Print Format
 Number of Columns: 24
 Print Width: 48mm
 Font (dots): 10 x 24
 Dots Per Line (graphics): 384
 Dot Spacing: 8 dots/mm (vertical and horizontal).
Character Set
IBM
®
224 character set, CP437.
Print Speed
50 mm/s.
Test Print
Firmware version, encoded calibration data, supported character set.
Control Buttons
 Paper Feed
 Lid Release.
Sensors
Paper out (opto reflective) and Head Up (mechanical).
Data Input
 LP930: RS-232 Serial.
 LP930-BT: Bluetooth
®
Baud Rate
9600 baud rate.
Data Buffer
20kb.
Power Requirements
Input voltage range: 12V to 24V DC.
Average Current when printing:
 2A @ 12V DC input
Peak Current when printing:
 7A @ 12V DC input.
Standby Current:
 100mA @ 12V DC input