Control System Operation
Commercial Electric Water Heaters • 37
FAULT OCCURRENCE MENU
Fault Occurrence Menu
ACTION DISPLAY
Total accumulated number each individual Fault condition has
occurred is displayed in this menu. This running total of Fault
Occurrences can be useful in determining which (if any) operational
problems have been persistent.
Fault Occurrence Menu
RESTORE FACTORY DEFAULTS MENU
Restore Factory Defaults
ACTION DISPLAY
This control system menu allows the user to restore most of the
control system’s user settings to their factory default settings. User
settings in the Alarm Output Setup and Display Settings menus are
unaected by executing Restore Factory Defaults
From the Main Menu use the Up/Down buttons to select (highlight in
black) the “Restore Factory Defaults” menu.
Press the Operational Button underneath “SELECT.” The Restore
Factory Defaults menu will be displayed.
From the Restore Factory Defaults menu press the Operational Button
underneath “YES.” The display will show text conrming the factory
default settings have been restored.
Press the Operational Button underneath “BACK” to exit the Restore
Factory Defaults menu.
To Next Page
Loading...
Need help?
General
