EasyManua.ls Logo

Lochinvar NKC 199 User Manual

Lochinvar NKC 199
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
100275091_2000533998_Rev C
FIRE TUBE COMBI
Noble Combi Boiler
Installation & Service Manual
Models: 110 - 199
This manual must only be used
by a qualified heating installer
/ service technician. Read all
instructions, in this manual before
installing. Perform steps in the
order given. Failure to comply
could result in severe personal
injury, death, or substantial
property damage.
WARNING
Save this manual for future reference.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lochinvar NKC 199 and is the answer not in the manual?

Lochinvar NKC 199 Specifications

General IconGeneral
ModelNKC 199
Input BTU/hr199, 000
AFUE95%
Fuel TypeNatural Gas
Efficiency95%
TypeCondensing Boiler
Vent Size3"
Gas Connection Size3/4" NPT
Electrical Requirements120V, 60Hz

Summary

Please Read Before Proceeding

1 Determine Boiler Location

Provide Clearances

Details minimum clearance requirements from combustible materials and for service access.

2 Prepare Boiler

Gas Conversions

Explains how to convert the boiler for propane gas operation.

3 General Venting

Install Vent and Combustion Air Piping

Guides the installation of vent and air piping, emphasizing material compliance and airtightness.

4 Sidewall Direct Venting

Vent/Air Termination – Sidewall

Details how to position and orient sidewall terminations for proper airflow and safety.

5 Vertical Direct Venting

Vent/Air Termination – Vertical

Specifies placement and orientation for vertical roof terminations.

6A Hydronic Piping

6B Domestic Water Piping

Scalding

Warns about scalding hazards and the requirement for anti-scald mixing valves.

7 Gas Connections

8 Field Wiring

10 Start-up

Fill Water

Guides the process of filling the boiler with water and checking water chemistry.

Freeze Protection

Details how to apply freeze protection fluids and associated warnings.

Purge Air from Water System

Guides the process of removing air from the heating system after filling.

Check for Gas Leaks

Provides procedures for checking gas connections for leaks.

Final Checks Before Starting the Boiler

Lists critical checks to perform before the initial boiler startup.

Setup Wizard

Guides the installer through initial boiler setup parameters.

Check Flame and Combustion

Guides the process of checking the burner flame and combustion analysis.

12 Maintenance

Service Technician

Lists tasks for annual startup and general service by a technician.

Check Boiler Relief Valve

Details inspection and testing of the safety relief valve.

Cleaning the Boiler Heat Exchanger

Provides detailed steps for cleaning the boiler's heat exchanger.

13 Troubleshooting

Checking Temperature Sensors

Provides resistance values for temperature sensors to aid in diagnosis.

Combustion Analysis Procedure

Guides the process of analyzing combustion gases for optimal performance.

Related product manuals