To Next PageTo Next Page
Need help?Do you have a question about the Lochinvar FTXL and is the answer not in the manual?
General| Model | FTXL |
|---|---|
| Category | Boiler |
| Fuel Type | Natural Gas or Propane |
| Heat Exchanger | Stainless Steel |
| Vent Type | Direct Vent |
| Type | Condensing |
| Dimensions | Varies by model |
| Water Content | Varies by model |
| Vent Diameter | 2" to 4" |
| Weight | Varies by model |
| Efficiency | Up to 98% Thermal Efficiency |
| Turndown Ratio | Up to 10:1 |
Overview of the CON-X-US board components and status LED indicators.
Procedure for opening the unit and listing essential installation kit components.
Instructions for installing the CON-X-US board on FTXL model units.
Steps for installing the CON-X-US board on KB and WH model units.
Instructions for installing the CON-X-US board on KH and AW model units.
Procedure for SNR models and the overall wiring schematic for the CON-X-US.
Connecting the CON-X-US device to a Wi-Fi network for registration.
Choosing the target Wi-Fi network and entering its password for connection.
Verifying Wi-Fi connection and downloading the necessary mobile application.
Creating a new user account or logging in and registering the CON-X-US device.
Inputting required device information and utilizing scan features for registration.
Finalizing the registration process and selecting the desired unit from a list.
Configuring the Site Manager and granting access to other users for the CON-X-US system.
Setting specific access levels ('View Only' or 'View & Edit') for different users.
Configuring notification types and managing user links/unlinks within the system.
Managing parameter updates to the boiler, including sending new and reverting old settings.
Employing the sort function to filter and view registered boilers by various criteria.
Understanding CON-X-US LED status indicators and their corresponding troubleshooting actions.
