2.4 Reset Button
SECTION 2.4
Reset Button
If Never Paired
Press Reset Button
for three (3) seconds
5
In order to setup the Lockly
®
to another smart phone, you must have your “Activation
Code” available. The Activation Code can be found on the Activation Code Card
(PART U) that came with your smart lock.
After you have the Activation Code ready, push the reset button on the back panel of the
Lockly
®
Secure to perform your reset. See below to see which Reset Process applies for
you. Once the smart lock has been reset, all the data previously stored will be deleted.
Press Reset Button for
one (1) second or till
you hear a short beep
Open the Lockly
®
smartphone app to
add your lock using
the Activation Code
To Next Page
Loading...
Need help?
General
