2.6 Rebooting Your Lock
SECTION 2.6
NOTICE
Reboot Lockly
®
in case of dead battery or
malfunction. No settings will be changed and all
Access Codes will still be stored within Lockly
®
.
Press and release the reboot button when you want to reboot the lock. Your Lockly
®
will beep once after reboot. Only reboot when necessary.
To reboot, find the reboot button located on the bottom of the exterior side of Lockly
®
lock. The reboot button is located in the middle of the two 9V battery backup sockets.
You will need something small such as a paperclip, to press the reboot button. Insert
the paper clip and press down firmly and let go. Your screen should restart and the
lock should reboot automatically.
Reboot Button
6
To Next Page
Loading...
Need help?
General
