9 – Declarations of Conformity
12
Declaration of Conformity
In accordance with the EC Regulations for Electro-Magnetic Compatibility 89/336/EWG, Appendix I
The Manufacturer Loctite Deutschland GmbH
Arabellastraße 17
D-80925 München
declares that the unit designated in the following is, as a result of its design and construction, in
accordance with the European regulations, harmonized standards, national standards, and technical
specifications listed below.
Designation of the unit Rotorspray
Unit number 97115
Applicable EC Regulations EC Regulations for Electro-Magnetic Compatibility
89/336/EC in the version 93/68/EC
Applicable harmonized standards EN 50082-1 1992; EN 55014/4 1993; IEC 801-2, 3, 4
Date/Manufacturer´s signature 12/08/2000 General Manager (F. Löhr)
For changes to the unit that were not approved by Henkel Loctite, this declaration loses its validity.
Declaration of Conformity
In accordance with the EC Machine Regulations 98/37/EC
The Manufacturer Loctite Deutschland GmbH
Arabellastraße 17
D-80925 München
declares that the unit designated in the following is, as a result of its design and construction, in
accordance with the European regulations, harmonized standards, national standards, and technical
specifications listed below.
Designation of the unit Rotorspray
Unit number 97115
Applicable EC Regulations EC-Machine Regulations 98/37/EC
Applicable harmonized standards DIN EN 292 Part 1 11.1991; DIN EN 292 Part 2 11.1991
Date/Manufacturer´s signature 12/08/2000 General Manager (F. Löhr)
For changes to the unit that were not approved by Henkel Loctite, this declaration loses its validity.
To Next Page
Loading...
