EasyManua.ls Logo

Loewe Connect 22 SL - Page 23

Loewe Connect 22 SL
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
an LNB, and a single FSK transceiver for communication with ODUs that support multiple LNB
congurations over a single coax connection.The BCM94505 reference design is available for
easy system design and testing using the BCM4505 advanced modulation receiver chip.
TECHNISCHER KUNDENDIENST
PLL for low-jitter operation and glueless integration with Broadcom's high definition
audio
video subsystems, such as the BCM7401 and the BCM7402. The communication link
sections include an on-chip microcontroller for all system configuration, acquisition,
control,
monitoring and diagnostics functions, as well as an integrated DiSEqC 2.x controller for
2way
communication with an LNB, and a single FSK transceiver for communication with
ODUs that support multiple LNB configurations over a single coax connection.The
BCM94505 reference design is available for easy system design and testing using the
BCM4505 advanced modulation receiver chip.
9 VIDEO BACK-END PROCESSOR (PNX5120EH)
The PNX5120EH is an advanced video picture improvement IC and the world's first
solution,
NXP’s Motion Accurate Picture Processing (MAPP), to combine movie judder
cancellation,
motion sharpness and vivid color management in a single device. Aimed primarily at
digital
and hybrid flat panel televisions in the mid-end and high-end European,Asian and U.S.
consumer markets, it complies with relevant industry standards.LCD TVs represent a
huge
and growing market, and the PNX5120EH offers manufacturers a unique combination of
richer color, dynamic motion, sensational sharpness, deep contrast, and full HD
resolution.
Moreover, you can easily tailor that balance via the Automatic Picture Control tool
(delivered
by NXP as part of a separate System Design-in Toolkit) to meet your own image quality
requirements.
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
Telefon (0 92 61) 99-0
Telefax (0 92 61) 99-730
e-mail: hotel-service@loewe.de
www.loewe.de
Seite 11 von 24 Stand: 26.01.2012
VIDEO BACK-END PROCESSOR (PNX5120EH)
The PNX5120EH is an advanced video picture improvement IC and the world's rst solution,
NXP’s Motion Accurate Picture Processing (MAPP), to combine movie judder cancellation,
motion sharpness and vivid color management in a single device. Aimed primarily at digital
and hybrid at panel televisions in the mid-end and high-end European,Asian and U.S.
consumer markets, it complies with relevant industry standards.LCD TVs represent a huge and
growing market, and the PNX5120EH offers manufacturers a unique combination of richer
color, dynamic motion, sensational sharpness, deep contrast, and full HD resolution.
Moreover, you can easily tailor that balance via the Automatic Picture Control tool (delivered
by NXP as part of a separate System Design-in Toolkit) to meet your own image quality
requirements.
TECHNISCHER KUNDENDIENST
10 PIXELLENCE II
PixellenceII IC is a real-time image processing chip. It is mainly a co-processor sitting at
the
back of the video ASSP (i.e. concept IC) in a typical TV chassis. PixellenceII gets the
picture
that will otherwise be transmitted to the panel in RGB format and applies Vestel
patented
image and video processing algorithms to further enhance the picture. After processing,
the
video is transmitted to the 50/60 Hz panel serially through LVDS links and in RGB
format.
PixellenceII IC supports Full HD (1920x1080) and WXGA (1366x768) resolutions with
10bit or 8-bit processing modes. PixellenceII is also configurable to other common
resolutions such as 1920x1280, 1680x1050, 1440x900, 1280x1024, 1024x768,
1920x1200, 1600x900.
The PixellenceII IC incorporates following Vestel patented algorithms, functions and
interfaces:
Algorithms:
.
Skin-tone detection and correction
Color Saturation
Dynamic Contrast Enhancement
Sharpness & CTI
De-ringing
De-blocking
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
Telefon (0 92 61) 99-0
Telefax (0 92 61) 99-730
e-mail: hotel-service@loewe.de
www
.loewe.de
Seite 12 von 24 Stand: 26.01.2012