Loewe Connect 48 User Manual (English)

Other manuals for Loewe Connect 48

Questions and Answers:

S
Scott CrosbyAug 15, 2025
What to do if there is no sound on my Loewe LCD TV?
- M
  Michael ClarkAug 15, 2025
  If you're not getting any sound even when playing a video or music file on your Loewe LCD TV, first, make sure the TV isn't muted and the volume is turned up. Press the V+ key on the remote control for a longer time to increase the volume and cancel any mute setting. Also, check under System settings ? Connections ? Sound components to ensure that an audio device that does not exist or is not connected is not registered. Connect the audio device and switch it on. In the Sound components wizard change back to TV speakers.
D
Dr. Matthew VegaAug 18, 2025
Why does my Loewe Connect 48 LCD TV turn off automatically?
- F
  fbrownAug 18, 2025
  If your Loewe LCD TV is automatically switching off, it's likely due to the automatic shutdown feature, which is designed to save energy. This feature turns off the TV after 4 hours of inactivity if at least one signal input group is set to Home Mode. Using automatic shutdown is recommended for the purposes of energy saving and safety.
M
Michael Woods PhDAug 22, 2025
How to fix AV input issues on Loewe LCD TV?
- A
  Amber HamptonAug 22, 2025
  If you're experiencing general problems when connecting external devices via an AV input on your Loewe LCD TV, the signal type might be set incorrectly. To fix this, set the correct signal type under System settings ? Connections ? AV connection settings ? Signal type. If AV standard or Signal type is set to “Automatic” then this can lead to false detections with non-standard signals. In this case standard and signal must be set according to the information in the operating manual of the external device.
E
Erika NobleAug 25, 2025
What to do if CA module errors occur on Loewe Connect 48?
- B
  brettlongAug 26, 2025
  If you are experiencing errors when running a CA module on your Loewe LCD TV, switch the TV off, remove the CA-module from the TV, wait a few seconds, reinsert the CA module, and then switch the TV on again.
E
emarshallAug 28, 2025
How to change the language on Loewe LCD TV?
- M
  Michele ArmstrongAug 28, 2025
  If all the menus on your Loewe LCD TV are displayed in the wrong language, it means the menu language was set incorrectly. To change it, press the HOME key, call last menu item (bottom left), mark the fourth item from above in the following list and move to next column to the right, call first list item with OK, select the language, and confirm it with OK.
B
brownwilliamAug 31, 2025
Why is there no sound from my Loewe LCD TV's external digital audio amplifier?
- C
  Cheryl ThompsonAug 31, 2025
  If there is no sound via the external digital audio amplifier connected to your Loewe LCD TV, it could be due to a couple of reasons. First, the external digital audio amplifier may not support the selected sound format (Dolby Digital, dts, MPEG). In this case, set PCM stereo on the DVD player in the sound selection. For DVB stations switch Language/Sound. Second, the TV and external digital audio amplifier might not be properly connected. Connect SPDIF OUT from the TV to a digital input of the external digital audio amplifier and select the appropriate input to this.
S
Sarah MoranSep 4, 2025
What to do if Loewe Connect 48 doesn't get IP address automatically?
- S
  Sarah LevineSep 4, 2025
  If your Loewe LCD TV is not being issued an IP address despite automatic IP configuration, it indicates that no DHCP server is working on your network. To resolve this, set up a DHCP server or assign the IP addresses for the TV set manually.
T
Tammy PerezSep 7, 2025
Why are Teletext characters wrong on my Loewe Connect 48?
- L
  lsimmonsSep 8, 2025
  If your Loewe LCD TV is displaying various characters incorrectly in Teletext, it's likely that the wrong character set has been set in the System settings. To correct this, go to System settings ? Control ? more ... ? Standard Teletext ? Character set ? Standard, or select the appropriate character set.
C
Caleb ArmstrongSep 12, 2025
Why Loewe Connect 48 LCD TV can't find wireless routers?
- D
  Derek KleinSep 12, 2025
  If your Loewe LCD TV isn't finding any wireless routers when searching, it means the router is not ready for wireless communication. Check your wireless router and try to make the connection again a few minutes later.

Loewe Connect 48 Specifications

General

3D	No
Volume control	Digital
Headphone connectivity	3.5 mm
Annual energy consumption	147 kWh
RS-232 ports	0
HDMI ports quantity	4
SCART ports quantity	1
USB 2.0 ports quantity	2
Consumer Electronics Control (CEC)	DigiLink
Product color	Black, Silver
Mercury content	0 mg
Panel mounting interface	200 x 200 mm
Response time	8 ms
Display diagonal	48 \
Display brightness	385 cd/m²
Display technology	LCD
Native refresh rate	100 Hz
LED backlighting type	Edge-LED
Display diagonal (metric)	122 cm
Supported graphics resolutions	3840 x 2160
Video formats supported	H.264, H.265, MPEG, MPEG2, MPEG4
Audio decoders	Dolby Digital
RMS rated power	80 W
AC input voltage	220 - 240 V
Power consumption (standby)	0.5 W
Tuner type	Analog & digital
Digital signal format system	DVB, DVB-C, DVB-C2, DVB-S2, DVB-T2