Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 User Manual (English)

Questions and Answers:

J
jimenezjamesAug 18, 2025
Why is there no sound via the external digital audio amplifier on my Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100?
- A
  Angela WilsonAug 18, 2025
  There might be a couple of reasons for the lack of sound: * The external digital audio amplifier might not support the selected sound format (Dolby Digital, dts, MPEG). To resolve this, set PCM stereo on the DVD player in the sound selection. For DVB stations, switch to stereo in the Status display (END) – Language/sound (green button). * The TV and the external digital audio amplifier might not be properly connected. Ensure you connect the AUDIO DIGITAL OUT from the TV to a digital input on the amplifier, and select the corresponding input on the amplifier.
O
Oscar Rogers DVMAug 20, 2025
What to do if general problems when connecting external devices via an AV input to Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100?
- M
  Marissa RivasAug 20, 2025
  If you encounter general problems when connecting external devices, consider the following: * Ensure the device is correctly logged in to the connection wizard and connected as shown in the connection diagram (TV menu ? Connections ? New devices/modifications). Compare the connection diagram with the actual installation. * Verify that the AV standard is set correctly (page 17). * Confirm the signal type is set correctly (page 45). If the AV standard or AV signal is set to "Automatic," it might cause errors with non-standard signals. In this case, set the standard and signal according to the external device's operating manual.
D
David HopkinsAug 22, 2025
What to do if the control functions of the Loewe Recorder and the Timer are not working properly on my Loewe LCD TV?
- S
  Steven GarnerAug 22, 2025
  If the control functions for the Loewe Recorder and Timer aren't working correctly, check these potential causes: * The Digital Link function may not be activated or supported on the recorder. Activate Digital Link in the recorder (refer to the recorder's operating instructions). * The EURO-AV cable might not be connected. Connect the EURO-AV cable (page 47). * The recorder may not be registered. Register the recorder (page 44).
D
David EllisonAug 25, 2025
What to do if the connection of a decoder does not function properly on Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100?
- A
  Andrew BennettAug 26, 2025
  If your decoder connection isn't functioning correctly, here are a couple of things to check: * The signal may not be decoded because the correct decoder stations haven't been selected in the connection wizard. Follow the instructions in the connection wizard (TV menu ? Connections ? New devices/modifications) and select the appropriate decoder transmitter (page 44). * Sound might be missing in decoder mode because the wrong decoder sound has been assigned in the connection wizard. Follow the instructions in the connection wizard and select the right audio source (Decoder, TV oder Autom.) (page 44), see also decoder instructions.
J
Jaime KrauseAug 27, 2025
Why is the picture of a connected external recorder visible, but the timer cannot be called on my Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 LCD TV?
- K
  Kimberly ChavezAug 27, 2025
  If you can see the picture from an external recorder but can't access the timer, it's likely that the device isn't registered in the connection wizard or is connected differently than shown in the connection diagram. To fix this, in the connection wizard (TV menu ? Connections ? New devices/modifications), compare the connection diagram with the actual installation and connect as illustrated (page 44).
K
Karen BradshawAug 30, 2025
Why does my Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 display the error message 'no recorder available' even though the picture of a connected external recorder is visible?
- N
  Natalie ClementsAug 30, 2025
  If you're seeing the picture from a connected external recorder but still get the 'no recorder available' error, the device is probably not registered in the connection wizard or is connected differently than shown in the connection diagram. Correct this by comparing the connection diagram with your actual setup in the connection wizard (TV menu ? Connections ? New devices/modifications) and connecting as illustrated (page 44).
M
Michael WalkerSep 1, 2025
How to fix Digital Link Plus not working on Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100?
- R
  Ryan BakerSep 2, 2025
  If Digital Link Plus isn't working, here are a couple of potential causes: * The EURO-AV cable might not be fully wired (pin 10 not wired). If this is the case, replace the EURO-AV cable. * Some recorders can only adopt stations during the initial installation of the TV set. Try restoring the recorder to its factory settings (refer to the recorder's operating manual).
E
Eric MartinezSep 4, 2025
What to do if a programmed recording was not made on Loewe LCD TV?
- A
  Antonio MckeeSep 4, 2025
  A programmed recording might fail for these reasons: * For analogue stations using VPS data: The program to be recorded was not available via VPS. * For DVB stations with automatic time control: The provider removed the program from the EPG data due to a schedule change. Note that the stations are responsible for VPS data transmission (analogue) or automatic time control (DVB/MHEG-5). Data availability cannot be guaranteed.
J
James MartinezSep 6, 2025
How to fix Teletext displaying wrong characters on Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 LCD TV?
- L
  Linda MartinSep 7, 2025
  If Teletext is displaying character sets incorrectly, it's likely that the wrong character set has been selected in the Teletext menu. To fix this, go to Teletext menu ? Settings ? Character set ? and select either Standard or the appropriate character set.
T
Teresa JohnsonSep 9, 2025
Why are all menus displayed in the wrong language on my Loewe LCD TV?
- W
  wooddavidSep 9, 2025
  If all menus are displayed in the wrong language, it means that the menu language was set incorrectly. To correct this, set the menu language by pressing the INFO button in TV mode (Index). Mark the first key word and call it with OK. Then select the language and confirm with OK.

Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 Specifications

General

Brand	Loewe
Model	– Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100
Category	LCD TV
Language	English

Summary

Remote Control Functions

Remote Control Button Functions

Details the functions assigned to each button on the remote control for TV operation.

Control Unit Front Side

Device Control Buttons and Indicators

Explains the function of the physical buttons on the TV and their associated status indicators.

Rear Connections - Xelos A 32

Rear Connections - Xelos A 37

AV and Digital Interfaces

Details audio/video inputs/outputs, HDMI, PC, and other digital connection ports.

Antenna and Satellite Inputs

Describes the connection points for terrestrial, cable, and satellite antennas.

Operating Convenience

For Your Safety

Usage, Environment, and Power Safety

Guidelines for safe operation, environmental conditions, and electrical safety.

Air Circulation and Temperature

Instructions regarding ventilation and heat management for safe operation.

Environmental Protection

Safety and Maintenance

Covers repairs, supervision, cleaning, and thunderstorm precautions.

Initial Installation

TV and Remote Setup

Steps for installing the TV set and preparing the remote control.

Antenna and Power Connection

Guidance on connecting the antenna and the power supply.

Initial Installation (Continued)

Powering On/Off

Instructions on how to switch the TV set on and off using various methods.

First Installation Wizard

Guides users through the initial setup process after first power-on.

Daily Operation

Station Selection

Methods for selecting TV stations using the remote control or numeric keys.

Station List Navigation

How to browse and select stations using the station list.

Daily Operation (Continued)

Favourites Lists

Video Source Selection

Switching between different input sources like AV, HDMI, PC.

Daily Operation (Continued)

Sound Adjustment

Controlling volume, sound effects, and other audio settings.

Picture Adjustment

Settings for contrast, color, brightness, sharpness, and picture enhancement.

Picture Presets and Formats

Managing Stations

Station Search Wizard

Using the wizard to search for and update TV and radio stations.

Managing Stations (Continued)

Manual Station Search

Station Management Operations

Favourites List Management

Picture in Picture

PIP Basics and Operation

Introduction to Picture-in-Picture, display types, and basic controls.

PIP Control and Station Selection

Picture in Picture (Continued)

Configuring PIP Mode

Electronic Programme Guide

EPG Overview and Usage

Electronic Programme Guide (Continued)

Recording via EPG

Teletext

Teletext Basics and Page Selection

Digital Radio

Radio Mode Operation

DVB

Software Update Overview

Information on updating TV and DVB software via USB or DVB.

DVB (Continued)

Loading New Software

DVB (Continued)

Conditional Access Module (CA Module)

Instructions for inserting and using a CA module for digital channels.

Searching Encrypted Stations

Other Settings

Parental Lock Setup

Configuring parental controls to restrict access to programs.

PIN Code Management

Defining, changing, and managing the personal identification number (PIN).

Other Settings (Continued)

Timer Functions

Setting alarms, wake-up calls, and automatic switch-off timers.

Operating Additional Equipment

Connection Wizard

Guides users through connecting and configuring external AV devices.

AV Equipment Selection

Operating Additional Equipment (Continued)

Connecting AV Devices

Connecting Audio Amplifiers

Timer Recording with External Devices

PhotoViewer Operation

Operating Additional Equipment (Continued)

HDMI (DVI) Connections

Connecting devices via HDMI/DVI for digital video and audio transmission.

PC IN Connection

Connecting a PC to the TV's PC IN socket for monitor use.

Component IN Connection

Connecting devices via Component Video for enhanced picture quality.

Sound Components Wizard

Configuring audio output components for TV sound playback.

Direct Recording Methods

Programming timer recordings using EPG or Teletext.

Rotating the TV Set

Adjusting the TV's viewing position using the motor-controlled rotating foot.

Digital Link HD Operation

Playing Sound via Speakers

Timer Data Settings

Switch-off Position Specification

Troubleshooting

Menu and Connection Issues

Resolving problems with menu language, connections, and recorder functions.

Recorder and Timer Problems

Addressing issues with recorder control, timer functions, and digital link.

Troubleshooting (Continued)

Device Connectivity and Media Issues

Related product manuals

Loewe Concept L 32 Basic

45 pages

Loewe Spheros R 32 HD+ 100

79 pages

Loewe CONNECT 42 MEDIA 67407

83 pages

Loewe CONNECT 37 MEDIA 67403

83 pages

– Individual 46 Selection Full-HD+ 100 – Individual 40 Selection Full-HD+ 100 – Individual 32 Selection Full-HD+ 100

76 pages

Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 User Manual

Table of Contents

Questions and Answers:

Loewe – Xelos A 37 Full-HD+ 100 – Xelos A 32 Full-HD+ 100 Specifications

Summary

Remote Control Functions

Remote Control Button Functions

Control Unit Front Side

Device Control Buttons and Indicators

Rear Connections - Xelos A 32

Rear Connections - Xelos A 37

AV and Digital Interfaces

Antenna and Satellite Inputs

Operating Convenience

For Your Safety

Usage, Environment, and Power Safety

Air Circulation and Temperature

Environmental Protection

Safety and Maintenance

Initial Installation

TV and Remote Setup

Antenna and Power Connection

Initial Installation (Continued)

Powering On/Off

First Installation Wizard

Daily Operation

Station Selection

Station List Navigation

Daily Operation (Continued)

Favourites Lists

Video Source Selection

Daily Operation (Continued)

Sound Adjustment

Picture Adjustment

Picture Presets and Formats

Managing Stations

Station Search Wizard

Managing Stations (Continued)

Manual Station Search

Station Management Operations

Favourites List Management

Picture in Picture

PIP Basics and Operation

PIP Control and Station Selection

Picture in Picture (Continued)

Configuring PIP Mode

Electronic Programme Guide

EPG Overview and Usage

Electronic Programme Guide (Continued)

Recording via EPG

Teletext

Teletext Basics and Page Selection

Digital Radio

Radio Mode Operation

DVB

Software Update Overview

DVB (Continued)

Loading New Software

DVB (Continued)

Conditional Access Module (CA Module)

Searching Encrypted Stations

Other Settings

Parental Lock Setup

PIN Code Management

Other Settings (Continued)

Timer Functions

Operating Additional Equipment

Connection Wizard

AV Equipment Selection

Operating Additional Equipment (Continued)

Connecting AV Devices

Connecting Audio Amplifiers

Timer Recording with External Devices

PhotoViewer Operation

Operating Additional Equipment (Continued)

HDMI (DVI) Connections

PC IN Connection

Component IN Connection

Sound Components Wizard

Direct Recording Methods