61
changes from maximum to minimum are made and the oven door is opened or closer
quickly.
N.B. For liquid gas setting, the oven burner minimum is set by fully tightening the
thermostat by-passes.
Gas grill burners
To convert the gas to this type of burner, see the "oven burner" instructions above. The only
difference is that the burner is in the top of the oven, and there is no need to set the minimum
because the burner always works at full power.
1.9 TELESCOPIC RUNNERS (only for certain models)
The telescopic runners guarantee greater stability to the oven accessories. Placing the food on
the shelves or on the tray is easier and safer.
The shelves and trays must be securely fitted into their housing on the runners.
We recommend using oven gloves during cooking or while the oven is still hot.
1.91 RAY WITH ANTI-FALL DEVICE
The tray are equipped with safety system to prevent its extraction out of the
oven.
Inserting check that the anti-fall device (see picture) is always in the back.
The tray are extracted from the oven only if raised before.
For insertion of the trays on the grid please
follow the directions as per image, which can
be positioned either at the top or bottom.
1.9.2. Mounting mechanism rotisserie
Attach the tray 4 threaded bushings with nuts. Place
the media and the skewer through the holes of the
bushings previously attached to the tray. Place the
tray with the mechanism mounted on the rotisserie
grill upside down as shown in the bottom shelf of the
oven.
2. MAINTENANCE
WARNINGS:
Before carrying out any maintenance or conversion operations, turn off the electricity
supply and close the gas upstream of the appliance. If components and/or
accessories need replacing, use only Lofra spare parts only. All the operations
hereunder must be carried out by qualified technicians in accordance with the
enclosed instructions and current installation standards.
To Next Page
Loading...
