Logicube F-FALCON-SA User Manual

TYPES OF OPERATIONS
Logicube Forensic Falcon™ User’s Manual 96
 Statistics – Since there are no settings
or configurations for this operation, it is
not affected by Config Lock.
 Manage Repositories – A managed
repository cannot be added without the
unlock key. At this time, a managed
repository can be deleted without the
unlock key. A future software update
will require the unlock key to delete a
managed repository.
 System Settings – This entire section
cannot be accessed without the unlock
key.
 IP Settings – This entire section cannot
be accessed without the unlock key.
 Software Updates – This entire section
cannot be accessed without the unlock
key.
 Power Off – This entire section cannot
be accessed without the unlock key.
The Passwords can be saved into
a user profile/configuration and
loaded each time the Falcon is
turned on. See Section 6.0.10.1
for more information on saving
and loading a user
profile/configuration.
The Falcon can still be turned off
without the unlock key by using
the power switch located in the
back of the Falcon.
Remember the Config Lock
Key! If the Falcon is configured
to load with the Config Lock
set (enabled) the only way to
delete the Config Lock is to
reset the Falcon using the
Command Line Interface (CLI).

Logicube F-FALCON-SA Specifications

General

Brand	Logicube
Model	F-FALCON-SA
Category	Storage
Language	English