IMAGING
Logicube Forensic Falcon™ User’s Manual 45
matches the Source drive. For example, if the
Source drive is a 120GB drive and the
Destination drive is a 500GB drive, the Falcon
will limit the Destination drive’s capacity to
120GB to match the Source drive exactly.
SAMPLE SOURCE DRIVE:
SAMPLE DESTINATION DRIVE PRIOR TO
DRIVE TRIM:
SAMPLE DESTINATION DRIVE AFTER DRIVE
TRIM:
Drive Trim is only available in
Drive to Drive mode and by
default is set to NO.
Drive Trim only works with ATA
drives and will not work with USB
external drives (or drives
connected via USB), SAS or SCSI
drives.
To Next Page
Loading...
Need help?
General
