18
Checking your Microwave
Check your microwave after unpacking.
1. Press the Open Door button to open the
door.
2. Place a cup of water on the glass turntable
plate. Make sure the cup is microwave-safe
(it should not have any decorative metal
trim).
3. Close the door.
4. Press the STOP/Cancel button to clear any
settings that have already been made.
5. Press the START/+30SEC. button to start a
simple 30-second microwave cooking cycle
that allows you to check the operation of
the microwave.
6. When the cooking cycle has finished, the
water should be hot (be careful when you
take the cup out of the microwave).
7. Press the STOP/Cancel button to clear any
settings.
54, 7
For your safety, the microwave stops if
the door is opened during cooking. Close
the door and press the START/+30SEC.
button to continue the cooking cycle.
L20GS14_IB_Final140317.indd 18 17/3/14 1:49 pm
To Next Page
Loading...
Need help?
General
