19
Clock Setting
When the microwave is connected to the mains power, the LED display will show “0:00”, and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Timer and the hour digits
will flash.
2. Press the Numeric (0-9) buttons and enter
the time. For example, to input the current
time 12:30, you need to press “1”, “ 2”, “ 3”, “ 0”.
The input hour has to be within 1-12 and the
input minutes has to be within 0-59.
3. Press the Clock/Timer button again to
complete the clock setting. “:” will start
flashing. The clock setting is complete.
• This is a 12-hour clock. When the
microwave is connected to the mains
power for the first time or when
the power is resumed after a power
interruption, the LED display will show
“0:00”. To re-set the clock, follow the
above 3 steps.
• In the process of clock setting, if the
STOP/Cancel button is pressed or if
there is no operation within 1 minute,
the microwave will go back to the
previous status automatically.
• To find out the current time while
the microwave is in use, press the
Clock/Timer button. It will display
the current time for 2-3 seconds, then
return to the remaining cooking time.
2
1, 3
L20GS14_IB_Final140317.indd 19 17/3/14 1:49 pm
To Next Page
Loading...
