10
Software Version
1. Press and hold the INFO button for 2 seconds and then release it to view the software
version of this unit.
2. The software version will automatically disappear after 5 seconds.
Auto Scan Modes
There are two types of scans, one is Quick scan and the other is Full scan.
• Quick scan:
Searches the stations between channels 10A and 12D.
To activate the quick scan press the AUTO button.
• Full scan:
Searches all DAB channels in the UK DAB Band III.
Press and hold the AUTO button for 2 seconds.
Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are
related to the primary station. e.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station in the station list.
To select the secondary station, press the NEXT button when the “>” appears in the display
before the station name. When the secondary service ends, the unit will automatically switch
back to the primary station.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you when
aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold the SELECT button, the display will now show Manual tune.
2. Press the PREV / NEXT buttons to cycle through the DAB channels, which are numbered
from 5A to 13F.
3. After your desired channel number is selected, press the SELECT button to enter the
current multiplex, the top line will now display the rst station in the multiplex.
4. Press the PREV / NEXT buttons to see what stations are present in the found multiplex.
5. Once you have reached the last station in the found multiplex, it will revert back to the
rst station again. If you wish to exit the Manual Tuning mode, just press the SELECT
button.
L22DAB10_IB_final110826_adaptor change.indd 10 26/08/2011 10:24 AM
To Next Page
Loading...
